Quality Control on Packing Process of Willarine Margarine Products at PT. XYZ with FMEA and FTA Methods
DOI:
https://doi.org/10.70609/gtech.v9i1.6508Keywords:
Quality Control, FMEA, FTA, Margarine Willarine PackingAbstract
PT. XYZ is a company engaged in the crude palm oil processing sector, one of which is willarine margarine which is exported to various countries. In maintaining global competitiveness, the company strives to produce high-quality products. However, in practice there are still obstacles that need to be overcome. One of them is during the packing process there are three types of product defects identified, namely leakage in the pouch packaging, lack of margarine volume, and damage to the pouch carton. So this research uses the FMEA (Failure Mode and Effect Analysis) method used to determine and transfer the severity, occurrence, and detection levels, so that it is obtained with the highest total RPN, namely leaky pouch packaging of 904, and FTA (Fault Tree Analysis) as a clue with the root of the problem tree, so that it is known that the root causes are lack of rest time, lack of supervision, no concern for the importance of track setting instructions, and no worker concern for cleanliness. After the results are known, improvement proposals are given, namely providing sufficient rest time and always rechecking, providing track setting instructions, and always doing routine cleaning at the beginning and end of work.
Downloads
References
Abdurrahman, M. A., & Al-Faritsy, A. Z. (2021). Usulan Perbaikan Kualitas Produk Roti Bolu Dengan Metode Six Sigma dan FMEA . Jurnal Rekayasa Industri , 3 (2), 73-80.
Anwar, S., Ulum, R. B., & Widarman, A. (2023). Analisis Pengendalian Kualitas Dengan Menggunakan Metode FTA (Fault Tree Analysis) dan FMEA (Failure Mode And Effect Analysis) Pada Proses Produksi Pita Cukai Berperekat Di Perusahaan Percetakan Dokumen Sekuriti Karawang. Jukim , 2 (04), 114-128.
Bachtiar, M., Dahda, S. S., & Ismiyah, E. (2021). Analisis Pengendalian Kuaitas Produk Pap Hanger Menggunakan Metode Six Sigma dan FMEA Di Pt. Ravana Jaya Manyar Gresik. JUSTI , 1 (4), 609-618.
Berlyan, R., Kurniawan, W., & Sari, I. P. (2021). Usulan Perbaikan Kualitas Produk Topside Menggunakan Metode FMEA di PT. XYZ. Journal Of Management , 14 (2), 189-203.
Dzikri, A. F., Hidayat, & Negoro, Y. P. (2024). Analisis Pengendalian Kualitas Pada Produk Songkok Menggunakan Metode FMEA dan FTA Pada CV. ABC . G-Tech: Jurnal Teknologi Terapan , 48 (4), 2567-2577.
Hardianto, R. D., & Nuriyanto. (2023). Analisis Penyebab Reject Produk Paving Block Dengan Pendekatan Metode FMEA dan FTA. Jurnal Cakrawala Ilmiah , 2 (12), 4635-4648.
Kalid, S. I. (2022). Pengendalian Kualitas Cacat Produk Tas Kulit Dengan Metode Failure Mode And Effect Analysis (FMEA) dan Fault Tree Analysis (FTA) di PT Mandiri Jogja Internasional. Jurnal Cakrawala Ilmiah , 1 (6), 1307-1320.
Krisnaningsih, E., Gautama, P., & Syams, M. F. (2021). Usulan Perbaikan Kualitas Dengan Menggunakan Metode FTA dan FMEA. Jurnal InTent , 4 (1), 41-54.
Paquita, E. V., & Laksono, P. W. (2022). Upaya Pengendalian Kualitas Produk Menggunakan Metode Fmea Serta Pendekatan Kaizen di PT Dan Liris. Seminar dan Konferensi Nasional Idec 2022 , D08.1-D08.11.
Priyambada, A., Finali, A., DY, P. I., & Umar, M. L. (2024). Analisa Penyebab Kerusakan Pada Belt Conveyor di PT XYZ Menggunakan Metode FTA dan FMEA . Journal of Scientech Research and Development , 6 (1), 1015-1025.
Purba, A. P., Lubis, R. F., & Sitorus, T. M. (2022). Pengendalian dan perbaikan kualitas produk furniture dengan penerapan metode SQC (statistical quality control) dan FTA (fault tree analysis). Jurnal Sains dan Teknologi , 22 (2), 366-378.
Rahman, Arif, & Perdana, S. (2021). Analisis Perbaikan Kualitas Produk Carton Box di PT XYZ Dengan Metode DMAIC dan FMEA. Jurnal Optimasi Teknik Industri , 03 (01), 33-37.
Renosari, P., Oemar, H., & Fauziah, S. R. (2023). Combination of FTA and FMEA methods to improve efficiency in the manufacturing company. International Scientific Journal about Logistics , 10 (3), 487-495.
Romadhoni, M. I., Andesta, D., & Hidayat. (2022). Identifikasi Kecacatan Produk Kerangka Bangunan Di Pt. Ravana Aya Menggunakan Metode FMEA dan FTA. Jieom , 05 (02), 236-247.
Safira, S. D., & Damayanti, R. W. (2022). Analisis Defect Produk dengan Menggunakan Metode FMEA dan FTA untuk Mengurangi Defect Produk (Studi Kasus: Garment 2 dan Garment 3 PT Sri Rejeki Isman Tbk). Seminar dan Konferensi Nasional IDEC 2022 , D03.1-D03.10.
Tanto, A. P., Andesta, D., & Jufriyanto, M. (2023). Analisis Kecacatan Produk dengan Metode FMEA dan FTA pada Produk Meja OKT 501 di PT. Kurnia Persada Mitra Mandiri. Jurnal Serambi Engineering , VIII (2), 5206-5216.
Wicaksono, A., & Yuamita, F. (2022). Pengendalian Kualitas Produksi Sarden Mengunakan Metode Failure Mode And Effect Analysis (FMEA) dan Fault Tree Analysis (FTA) Untuk Meminimalkan Cacat Kaleng Di PT XYZ . Jurnal Teknologi dan Manajemen Industri Terapan , 1 (3), 145-154.
Wijaya, B. S., Andesta, D., & Priyana, E. D. (2021). Minimasi Kecacatan pada Produk Kemasan Kedelai Menggunakan Six Sigma, FMEA dan Seven Tools di PT. SATP. Jurnal Media Teknik dan Sistem Industri , 5 (2), 83-91.
Wulandari, R. S., Hakim, L., & Haris, R. F. (2022). Analysis of Product Defects in the Packing Production Process at PT.XYZ Using FTA and FMEA Methods. Jkie , 9 (1), 52-60.
Yafi, M. M., & Cahyono, M. D. (2024). The Implementation of Fault Tree Analysis (FTA) dan Failure Mode And Effect Analysis (FMEA) to Improve the Quality of Salt Industry in East Java. Greenomika , 6 (1), 94-102.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Novantya Ramadhan Argaputra, Deny Andesta, Hidayat Hidayat
This work is licensed under a Creative Commons Attribution 4.0 International License.
