Vibration Monitoring to Predict Spindle Bearing Damage on CNC Machines using Outseal PLC and SCADA at PT SKY LINE JAYA
DOI:
https://doi.org/10.70609/g-tech.v9i3.7295Keywords:
Vibration, Spindle Bearing, CNC Router Machine, Outseal PLC, Haiwell Cloud SCADAAbstract
PT Sky Line Jaya is a company engaged in modern manufacturing that will use modern technology in the production process. One of the technologies used is the use of CNC router machines. Continuous use of CNC router machines has a weakness in spindle bearings that are easily damaged. The spindle bearing vibration monitoring system of CNC router machines is needed to predict spindle bearing damage so that production defects can be avoided. The higher the bearing vibration, the CNC router machine cannot work optimally. The higher the bearing vibration frequency, the more it can be assumed that the bearing is damaged. The permissible bearing vibration frequency is below 60 Hz, above that frequency it is considered damaged. The Hansford HS-420 vibration sensor with ladder programming using PLC Outseal has an error of 1.3% so it has good accuracy for use in vibration monitoring systems on CNC router machines at PT Sky Line Jaya. Haiwell Cloud SCADA can display the vibration of the CNC router machine spindle bearing well and has industry standard reliability that can be used non-stop 24 hours at PT Sky Line Jaya.
Downloads
References
Alfita, Riza, et al. "Perancangan Sistem Deteksi Vibrasi Dan Perubahan Beban Pada Motor Dengan Menggunakan Metode Fast Fourrier Transform." SinarFe7 6.1 (2024): 187-192.
Altaf, Muhammad, et al. "A new statistical features based approach for bearing fault diagnosis using vibration signals." Sensors 22.5 (2022): 2012.
Endriatno, Nanang. "Analisis getaran akibat massa yang tidak seimbang pada motor yang berputar." Dinamika: Jurnal Ilmiah Teknik Mesin 12.2 (2021): 58.
Febrianti, Chusnia, and Anggara Trisna Nugraha. "Implementasi Sensor Flowmeter pada Auxiliary Engine Kapal Berbasis Outseal PLC." Journal of Computer Electronic and Telecommunication 3.2 (2022).
Hasan, Hasan, et al. "Aplikasi Kontrol Dan Monitoring Pada Proses Pencucian Mobil Otomatis Berbasis PLC Outseal dan HMI Haiwell Untuk Modul Peraga Praktikum Otomasi Dasar." Jurnal ELIT 3.2 (2022): 22-31.
Irvian, Ferry, Hatib Setiana, and Danang Widjajanto. "Rancang Bangun Sistem Sortir Berat dengan Teknologi IoT Menggunakan Haiwell." Seminar Nasional Teknik Elektro. Vol. 10. No. 1. 2024.
Li, Ning, et al. "Dynamic response and failure analysis of bearing under the impact of vibration excitation." Engineering Failure Analysis 154 (2023): 107640.
Muhammad, Muaz, et al. "Design and Implementation of a SCADA Based Boiler Monitoring and Controlling System." 2024 14th International Conference on Advanced Computer Information Technologies (ACIT). IEEE, 2024.
Priyanto, Sugeng, Aryuanto Soetedjo, and Irrine Budi Sulistiawati. "Monitoring the Power Consumption of Home Appliances Using an IoT-Based SCADA System." 2024 8th International Conference on Information Technology, Information Systems and Electrical Engineering (ICITISEE). IEEE, 2024.
Rofix, Ahmad Nur, and Alfian Ma'arif. "Automatic Dam Gate Monitoring System with Outseal Mega V2 PLC and Haiwell HMI." Buletin Ilmiah Sarjana Teknik Elektro 4.3 (2022): 152-160.
Roza, Indra, et al. "Implementasi Alat Pendeteksi Getaran Bantalan Motor Induksi Pada Pabrik Menggunakan Sensor Piezoelektrik Berbasis SMS." RELE (Rekayasa Elektrikal dan Energi): Jurnal Teknik Elektro 3.1 (2020): 20-25.
Salodkar, Prachi, Siddhesh Nandanwar, and Saurabh Sawarkar. "Communication between Energy Meters and PLC Based on Modbus Protocol." 2023 14th International Conference on Computing Communication and Networking Technologies (ICCCNT). IEEE, 2023.
Setiono, Andika Mardian, Achmad Rijanto, and Dicki Nizar Zulfika. "Analisis Amplitudo Getaran Terhadap Jenis Kerusakan Unbalance, Looseness, Dan Kerusakan Bearing Pada Motor Induksi 3 Phase." Majamecha 2.1 (2020): 19-31.
Sufandi, Muhammad Ridhwan, et al. "Purwarupa Proses Pemantauan dan Pengisian Botol Kemasan Berbasis Modul PLC Outseal Dan HMI Haiwell." Jurnal ELIT 4.2 (2023): 26-35.
Tambunan, Chrisman Tambunan, Danang Widjajanto, and Hatib Setiana. "Implementasi Haiwell Cloud Scada Pada Sistem Monitoring Sorting By Weight." Seminar Nasional Teknik Elektro. Vol. 10. No. 1. 2024.
Wang, Kai, et al. "Theoretical model and experimental study of the influence of bearing inner clearance on bearing vibration." Engineering Failure Analysis 137 (2022): 106247.
Widodo, Pangestu, and Dimas Adiputra. "VibLab, Aplikasi Bantu Analisa Getaran pada Rangka Sepeda Motor Listrik berbasis Android." bit-Tech 7.3 (2025): 779-789.
Wirandi, Mohammad, MM Lanny W. Pandjaitan, and Deni Saputra. "Desain Sistem Pemantauan Level Tangki Air menggunakan PLC dan HMI Secara Real-time dalam skala laboratorium dan industri." Prosiding Seminar Nasional Teknologi Industri (SNTI). Vol. 11. No. 1. 2024.
Xu, Minmin, et al. "Vibration characteristics and condition monitoring of internal radial clearance within a ball bearing in a gear-shaft-bearing system." Mechanical Systems and Signal Processing 165 (2022): 108280.
Yudha, Fitroh Anugrah Kusuma. "Rancang Bangun Trainer Otomasi PLC Outseal 16 I/O." Jurnal Teknik Mesin dan Mekatronika (Journal of Mechanical Engineering and Mechatronics) 7.1 (2022): 51-62.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Anggara Putra Wicaksana, Rini Puji Astutik
This work is licensed under a Creative Commons Attribution 4.0 International License.
