Analysis Of The Work Posture Of Office Employees To Evaluate The Level Of Work Risk Using The Rapid Office Strain Assessment (ROSA) Method

Muhammad Abdullah Najib, Deny Andesta

Abstract


                Office ergonomics is a branch of ergonomics that covers the entire work environment (workstations) and work tools (especially using computers and chairs) in offices. Computer users or office workers often experience health problems related to musculoskeletal disorders (MSDs). The Secretariat and P3T BUMD Gresik Regency use a computer/laptop as the main work tool. Secretarial employees use computers for 8 (eight) hours daily, while P3T employees use computers for about 5 hours daily. The method used in this study was the Rapid Office Strain Assessment (ROSA). Assessment of work posture using the ROSA method on six office employees at BUMD Gresik Regency is divided into three sections. Section 1 assesses the height of the seat, the outside of the backrest seat surface, and the chair’s armrest. Section 2 conducts an assessment of the use of monitors and telephones. Section 3 assesses the use of mice and keyboards. Based on the calculation results using the ROSA method, the results obtained at the risk level value for each employee, namely, four employees have a high-risk level value or are at a dangerous/risky level and need to be repaired immediately. The other two employees indicate a safe / non-risky risk level.   


Full Text:

PDF

References


M. Luthfi, “Menggunakan Metode Rapid Office Strain Assessment ( Rosa ) Pada Pekerja Kantor X Program Studi Terapi Okupasi , Program Vokasi , Universitas Indonesia , Jakarta , Indonesia,” vol. 1, no. 1, 2022.

A. S. Putri and D. Amalia, “Analysis of Work Posture and Work-Related Musculoskeletal Disorders with ROSA Method at Batam Environmental Service,” Procedia Eng. Life Sci., vol. 2, no. 1, 2022, doi: 10.21070/pels.v2i0.1174.

N. Sholeha, R. A. Ratriwardhani, and ..., “Gambaran Keluhan Subjektif dan Penilaian Risiko Ergonomi Menggunakan Metode NBM dan ROSA Pada Pengguna Komputer di Kantor Pusat PT. XYZ,” … Wahana Pendidik., vol. 8, no. 13, pp. 362–369, 2022.

A. D. Eka, N. A. Mahbubah, and D. Andesta, “Analisis Postur Kerja Pada Pekerja Di Jalan Rel Dengan Pendekatan Metode Wera Dan Jsi,” JUSTI (Jurnal Sist. dan Tek. Ind., vol. 1, no. 3, p. 434, 2021, doi: 10.30587/justicb.v1i3.2623.

T. I. Oesman and Purwanto, “Penilaian Postur Kerja Guna Evaluasi Tingkat Resiko Kerja Dengan Metode Rapid Office Strain Assessment (Rosa),” J. Tek. Ind. Mesin, Elektro dan Ilmu Komput., pp. 37–42, 2017.

M. I. A. Shidiq, D. Andesta, and ..., “Rancangan Alat untuk Efektivitas Pengisian Antiscale di PT. PJB Gresik Berdasarkan Analisis Postur Kerja Menggunakan Metode Rapid Entire Body Assessment,” J. Serambi …, vol. VII, no. 3, pp. 3555–3565, 2022.

K. Ma’arif, D. Andesta, and S. S. Dahda, “Perancangan Alat Bantu Kerja Pengelasan Support Dengan Rekayasa Nilai Dan Ergonomi (Studi Kasus: Pt. Primakarya Jaya Sejahtera),” MATRIK (Jurnal Manaj. dan Tek., vol. 17, no. 1, p. 82, 2017, doi: 10.30587/matrik.v17i1.166.

R. Kurniawan, Asril, and Endang, “Media Kesmas ( Public Health Media ),” Media Kesmas (Public Heal. Media), vol. 1, no. 2, pp. 225–240, 2021.

P. T. Rahayu, C. Arbitera, and A. A. Amrullah, “Hubungan Faktor Individu dan Faktor Pekerjaan terhadap Keluhan Musculoskeletal Disorders pada Pegawai,” J. Kesehat., vol. 11, no. 3, p. 449, 2020, doi: 10.26630/jk.v11i3.2221.

T. Pratama, A. A. Hadyanawati, and S. Indrawati, “Analisis Postur Kerja Menggunakan Rapid Office Strain Assessment dan CMDQ pada PT XYZ,” J. Ilm. Tek. Ind. UMS, vol. 13, no. 1, pp. 1–7, 2019.

N. F. Ahmad and Maesa, “Evaluasi Office Ergonomic di PT . NDM dengan Metode Rapid Office Strain Assessment ( ROSA ),” TEKINFO - J. Ilm. Tek. Indusri dan Inf., vol. 10, no. 1, pp. 15–19, 2021.

B. A. H. Siboro, “Analisa Resiko Ergonomi Kerja Operator Inspeksi,” J. Profisiensi, vol. 5, no. 2, pp. 61–68, 2017.

A. D. Prabaswari, M. R. Suryoputro, and B. W. Utomo, “Analisis Postur Kerja pada Perusahaan yang Bergerak Bidang Pemeriksaan, Pengawasan, Pengujian, dan Pengkajian,” J. PASTI, vol. 14, no. 2, p. 181, 2020, doi: 10.22441/pasti.2020.v14i2.008.

S. K. Dewi, S. Nugroho, and W. Pramono, “( Cso ) Di Contact Center Pln Mampang Dengan Metode Rapid Office Strain Assessment ( Rosa ) Dan Quick Exposure Checklist ( Qec ),” Tek. Ind., pp. 1–8, 2021.

D. Andesta, “Perancangan Tas Sekolah Berbasis Model Ergonomic – Anthropometry Guna Pengembangan Sentra Industri Tas Di Kabupaten Gresik,” MATRIK (Jurnal Manaj. dan Tek., vol. 12, no. 2, p. 114, 2018, doi: 10.30587/matrik.v12i2.397.

Z. Hayati Zen and A. Mulyadi, “Analisis Postur Kerja Karyawan Kantor di Departemen Produksi Menggunakan Metode Rapid Office Strain Assesment (ROSA) (Studi Kasus : PT. Indah Kiat Pulp & Paper tbk),” J. Surya Tek., vol. 5, no. 2, pp. 46–56, 2017.

R. A. Pratama, E. Mas’idah, and W. Fatmawati, “Analysis of Employee Work Posture to Reduce Muscle Injury Using the ROSA (Rapid Office Strain Asassment) Method At PT. Sinar Semesta,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 8, no. 1, pp. 67–70.

Y. T. Prasetyo and A. Fatih Fudhla, “Perbaikan Tata Letak Fasilitas Gudang Dengan Pendekatan Dedicated Storage Pada Gudang Distribusi Barang Jadi Industri Makanan Ringan,” ejournal.uin-suska.ac.id, vol. 7, no. 1, p. 2021, Accessed: Jun. 08, 2022. [Online]. Available: http://ejournal.uin-suska.ac.id/index.php/jti/article/view/11283.

I. Kusumanto and septed hadyguna Hermanto, “Analisis Produktivitas PT. Perkebunan Nusantara V (PKS) Sei Galuh Dengan Menggunakan Metode American Productivity Center (APC),” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 2, no. 2, p. 129, 2016, doi: 10.24014/jti.v2i2.5098.

M. Siska and M. Teza, “Analisa posisi kerja pada proses pencetakan batu bata menggunakan metode NIOSH,” J. Ilm. Tek. Ind., vol. 11, no. 1, pp. 61–70, 2012.

H. Anwardi and M. R. Ridha, “Perancangan Alat Bantu untuk Memperbaiki Postur Kerja Karyawan pada Usaha Air Minum Mesjid Nurul Islam dengan Metode Quick Exposure Checklist (QEC).(Studi Kasus: Usaha Air Minum Mesjid Nurul Islam),” J. Tek. Ind., vol. 4, no. 2, 2018.

M. F. Fahmi and D. Widyaningrum, “Analisis Penilaian Postur Kerja Manual Guna Mengurangi Risiko Musculoskeletal Disorders (MSDS) Menggunakan Metode OWAS Pada UD. Anugrah Jaya,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 8, no. 2, pp. 168–174, 2022.

P. Ariyo and M. Nuruddin, “Analisis Postur Tubuh Pekerja Di Graph Multimedia Menggunakan Metode Rula (Rapid Upper Limb Assessment) Untuk Mengetahui Tingkat Resiko Pekerja Printing,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 8, no. 2, pp. 295–304, 2022.

M. I. Hamdy, M. Nur, A. Mas’ari, and F. E. Suheri, “Analisa Postur Kerja Manual Material Handling (Mmh) pada Karyawan Bagian Pembuatan Block Menggunakan Metode Rapid Upper Limb Assessment (Rula)(Studi Kasus: PT. Asia Forestama Raya),” J. Tek. Ind., vol. 5, no. 1, pp. 62–65, 2019.

I. Mindhayani, “Identifikasi Postur Kerja Bagian Pengelasan Dengan Pendekatan Ergonomi,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 7, no. 2, pp. 91–97, 2021.




DOI: http://dx.doi.org/10.24014/sitekin.v20i2.21899

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 SITEKIN: Jurnal Sains, Teknologi dan Industri



Editorial Address:
FAKULTAS SAINS DAN TEKNOLOGI
UIN SULTAN SYARIF KASIM RIAU
Kampus Raja Ali Haji
Gedung Fakultas Sains & Teknologi UIN Suska Riau
Jl.H.R.Soebrantas No.155 KM 18 Simpang Baru Panam, Pekanbaru 28293
Email: sitekin@uin-suska.ac.id
© 2023 SITEKIN, ISSN 2407-0939

SITEKIN Journal Indexing:

Google Scholar | Garuda | Moraref | IndexCopernicus | SINTA


Creative Commons License
SITEKIN by http://ejournal.uin-suska.ac.id/index.php